Bypass FRP TCL Tablet using PC

by

How to bypass FRP of TCL Tablet. Here we have explained in detail. And some PC tools are given through which you can remove FRP of all models of TCL Tab.

Bypass FRP TCL Tablet using PC

How to Bypass TCL Tablet FRP (From PC)

Here we have told the best ways to bypass FRP on all models of TCL Tablet. By following the method mentioned, you will be able to remove FRP absolutely free.

Method 1:

If your TCL tablet is on MediaTek (MTK) processor, you can remove FRP using SP Flash Tool.

  1. Download SP Flash Tool: You need to install SP Flash Tool and MTK USB Drivers on PC.
  2. Load Scatter File: Download your tablet’s firmware and extract the scatter file from it.
  3. Format FRP Partition:
    >Open SP Flash Tool.
    >Go to “Format” mode and select FRP partition.
    >Press “Start” and connect the tablet to PC.
  4. Wait for the process to complete:
    >Wait for the process to complete.
    >After that restart the tablet, FRP will be removed!

Method 2:

  1. Install ADB and Fastboot Tool: Install ADB Drivers on PC.
  2. Connect Tablet to PC: Connect the tablet with USB cable and enable ADB mode.
  3. Open Command Prompt: Open CMD (Command Prompt) and enter these commands:
    adb devices
    adb shell am broadcast -a android.intent.action.MASTER_CLEAR
  4. Restart Tablet: After running this command the tablet will restart and FRP will be removed.

Method 3:

  • Download Miracle Box Tool: Install Miracle Box on PC.
  • Connect Tablet to PC: Connect the tablet with USB cable and enable “MTK Mode”.
  • Choose Bypass FRP Option:
    Choose “MTK FRP Reset” option in Miracle Box.
    Press “Start” and wait for the process to complete.
  • Restart the tablet: When the process is complete, restart the tablet, FRP will be bypassed.

Without PC

You will be able to remove FRP from TCL Tablet without a computer. Below we have given a video, by following which, you can solve this problem without any computer and software.

Personal Experience

I once repaired a customer’s TCL tablet which was stuck in FRP lock. Its owner had forgotten his Google account and was not able to login with the new account. I first used SP Flash Tool but the device was not detecting. Then I used Miracle Box and FRP was unlocked in just 5 minutes! This method is quite easy and effective, you just need to install the correct drivers and tools. FRP can be bypassed with SP Flash Tool but sometimes it does not work in some models.

Leave a Comment